Flexible flat braid (32x7x0.15 mm) (Tinned Copper)
Flexible flat braid of tinned copper wire.
(Sales unit: meter)
MATERIAL
Bright tempered or tin-coated electrolytic copper.
ASSEMBLY
Skillfully woven and interlaced conduits, with an adequate pitch, to satisfy the requirements of the section and dimension of the mesh.
PROPERTIES
Braided based on thin wires of refined electrolytic copper. Exceptional elasticity and minimal curvature. It is produced with individual threads of between 0.10 mm and 0.25 mm in diameter, allowing sections from 0.75 mm² to 500 mm² to be obtained.
APPLICATIONS
Use for electrical connection, manufacturing of electrical devices, equipment safety and connection to the ground network, energy receptacles, lightning protection systems, conversion stations, among others.
Code Reference | mm2 section | ⌀ Exterior mm | Cable weight g/m | Resistance Ω/km at 20ºC |
NF-16 No. 1E | 2.50 | 5x1 | 25 | 8.21 |
NF-16 No. 2E | 5 | 8x1 | 50 | 3.95 |
NF-16 No. 3E | 8 | 8x1.5 | 80 | 2.47 |
NF-16 No. 4E | 10 | 10x1.5 | 100 | 1.95 |
NF-16 No. 5E | 16 | 15x2 | 160 | 1.24 |
NF-16 No. 6E | 20 | 20x2 | 200 | 0.983 |
NF-16 No. 7E | 25 | 25x2 | 250 | 0.795 |
NF-16 No. 8E | 30 | 25x2.5 | 300 | 0.658 |
CUSTOM BRAIDS
If you want custom braids for this product, contact us through the following link:
- Material
- Tinned copper
- Spindles
- 32
- Threads
- 7
- Thread diameter
- 0,15 mm
- Section
- 5 mm2